![]() You can select a line, linear edge, or plane to specify a pull direction. Since we wanted our extrusion to wrap around the model, we chose the analytical method for this example.īy default, emboss and deboss will extrude the feature normal to the sketch plane, but we can specify a pull direction to change the extrusion direction. The spline surface option will project a sketch onto complex faces, but it will not wrap around a model. In 2017 the spline surface method was added, allowing the wrap tool to project onto any surface. You also need to consider two wrap methods when using the wrap tool: analytical and spline surface.īefore the release of SOLIDWORKS 2017, the wrap feature could only accommodate conical and cylindrical surfaces. The examples below show the difference between the wrap types on our model. Several wrap types are available in the PropertyManager : emboss adds material, deboss removes material, and the scribe option splits the face following the sketch contour. The equation guarantees that the Wrap feature will cover the whole circumference of the cylindrical face.Īfter exiting the sketch, the setup is complete, and you are ready to use the wrap tool. The value of this dimension is set equal to the circumference of the part with a simple equation. In the example below, there is a dimension controlling the overall length. Next, draw a closed contour sketch on the reference plane created in the last step. SOLIDWORKS - Creating Reference Geometry & Planes If you want to learn more about creating reference geometry, please follow the link below. ![]() There are many ways to create planes in SOLIDWORKS. For this example, we made the plane by selecting the right plane as the first reference and the part surface for the second reference with the perpendicular option enabled. To use the wrap feature, you first need to create a reference plane tangent or parallel to the part surface. You can also find the wrap tool under Insert > Features > Wrap in the drop-down menu. The Wrap feature is located in the Features toolbar next to the rib and intersect tools. The SOLIDWORKS Wrap feature allows you to remove or add material to a part by projecting a sketch around a surface. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |